On Sun, 1 Aug 2010, Stan Thomas wrote:
> Is there actually a FAQ for this group?
No.
>
> On Aug 1, 2010 7:05 AM, "Jim Jackson" <> wrote:
>
>
>
>
>
>
>
>>>> I am using ts-7260 and I wanna connect a device via COM2. As it did not
>>>> work, I made som...
>
>>> One possibility is that getty will set the baud rate for you. If you
>>> boot the board without a...
>
>> I also doubted at the baud rate. But after i set the baud rate using
>> setserial with baud_base 1...
> You have to set the interface up, for the serial connection you require.
> That is what getty does. There is more than the baud rate.
> setserial can do some things, otherwise you need to program it.
>
> There are countless example programs and FAQs out there that show how to
> program the Linux serial interface, it is the same as on any other linux
> system - google is your friend. It is also a FAQ here so searching the
> group for stuff on serial use should help too. In fact, in the gzipped tar
> file I sent you re. an adc program, there is example rs232 source code!
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|