On 30/07/2010, at 11:10 PM, Razvan-Ionut Stoian wrote:
> However, when I decided to play with the SPI interface on my TS7200, I had
> exactly the same problem as the original poster. If you were a beginner,
> would you start programming interfaces in kernel space?
I haven't been following this discussion up to now, so perhaps I am off base.
However, have you (or the OP) taken a look at e.g.
http://www.google.com.au/search?q=linux+kernel+spi+ep93xx
I believe you can get a 2.6.34.x kernel running without too much bother - IIRC
Matthieu is onto that.
Hope this helps!
cheers
peter
--
http://peteg.org/
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|