ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: TS-7390 - EABI distribution and crosstool mismatch

To:
Subject: Re: [ts-7000] Re: TS-7390 - EABI distribution and crosstool mismatch
From: "Donal O'Connor" <>
Date: Wed, 28 Jul 2010 18:02:13 +0100


Hi Gene,

Thanks.

Ah no, no need to recompile as there's a Lenny image provided.

I've yet to put up how I done everything. I promised some here too I'd upload a dd of the sd card.

If I get time I'll do it.

Donal

On Wed, Jul 28, 2010 at 5:49 PM, Khai <> wrote:
 


Hi Donal,

Thanks for you help. Martin's toolchain works with tslib. Next step for me is compiling and building Qt.

Did you have to recompile the kernel with this toolchain?

BTW I am a big fan of your automon blog.

Gene



--- In ts-7000%40yahoogroups.com, "Donal O'Connor" <> wrote:
>
> By the way the one I used was arm-ep9312-linux-gnueabi
> It does seem much quicker when running QT at least than the oabi version.
>
> Donal
>
> On Tue, Jul 27, 2010 at 10:50 PM, Donal O'Connor <>wrote:

>
> > Try this: http://freaknet.org/martin/crosstool/packages/
> >
> > <http://freaknet.org/martin/crosstool/packages/>Martin's toolchain worked
> > for me anyways.
> >
> > Donal
> >
> >
> > On Tue, Jul 27, 2010 at 6:51 PM, Khai <> wrote:
> >
> >>
> >>
> >> Hi,
> >>
> >> I was wondering if anyone else is using the armel distribution provided by
> >> TS (debian-lenny-eabi-armel-512mb-apr092009.tar.gz) with their eabi
> >> toolchain. There seems to be a version mismatch between the filesystem (g++
> >> 4.3.2, glibc 2.7) and the crosstool (g++ 3.4.4, glibc 2.3.5). I suspect this
> >> is why I get an illegal instruction message when I ran ts_calibrate (tslib)
> >> whenever it enters the perform_calibration function that has lots of float
> >> operations.
> >>
> >> Is there a toolchain that will work with this distribution? I am trying to
> >> avoid having to install armel myself. OABI isn't an option as it is running
> >> too slow.
> >>
> >> Thanks,
> >> Gene
> >>
> >>
> >>
> >
> >
>




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU