[ts-7000]

To:	<>
Subject:	[ts-7000]
From:	"Fabio Vaz" <>
Date:	Mon, 26 Jul 2010 18:46:25 -0300

Hi all,

I tried to update the kernel at my ts-7550 board. But something went wrong and the board doesn't boot anymore. I'd like to restore the kernel but my ts-752 spi doesn't have the nandctl utility. I downloaded it from :

ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/binaries/ts-utils/ts-utils-jun012010/

But it doesn't work. When I execute it it gives me an error message. Can someone please send me the nandctl from a ts-7550 board ?

If possible please send the ts7500ctl too.

Thanks in advance,

Fabio.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000], Fabio Vaz <=

Previous by Date:	[ts-7000] serial blaster and minicom, Pat O'Hara
Next by Date:	[ts-7000] Re: how to compile Linux Kernel 2.6 for SD card boot & root file sys for TS-7260., nrajlich@ymail.com
Previous by Thread:	[ts-7000] serial blaster and minicom, Pat O'Hara
Next by Thread:	[ts-7000] TS-7300 tips and tricks, mario.huizar
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU