Hi Ynezz
I tried building OE but it failed (alot!) Any chance of sharing some tips on
how you to it to successfully compile? Could you send your local.conf and any
other relevant settings?
Did you use the angstrom setup or the open embedded one?
thanks Dominic
--- In Petr ©tetiar <> wrote:
>
> Hi,
>
> I've updated Matthieu's patchset to 2.6.33[1] and it boots so I've put
> prebuilt zImage[2] + rootfs[3] for anybody interested in testing it, along
> with updated patchset against 2.6.32.9[4]. So far I've tested LEDs and
> ethernet driver(using rootfs over NFS).
>
> The kernel and rootfs is built using Openembedded, it's slightly modified
> minimal-image, just added angstrom-led-config and kernel-modules to it.
>
> 1. http://ynezz.ibawizard.net/ts72xx/linux-kernel/2.6.33/
> 2. http://ynezz.ibawizard.net/ts72xx/oe/zImage-2.6.33-r1-ts72xx.bin
> 3.
> http://ynezz.ibawizard.net/ts72xx/oe/Angstrom-minimalist-image-ts72xx-glibc-ipk-2009.X-test-20100308-ts72xx.rootfs.tar.bz2
> 4. http://ynezz.ibawizard.net/ts72xx/linux-kernel/2.6.32.y/
>
> -- ynezz
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|