--- In Matthieu Crapet <> wrote:
>
> Greetings,
>
> Here it is finally!
>
> If some of you could test:
> - SD Card (TS-7260) support
> - NAND support (using generic nand plarform driver)
>
> Concerning the last point, you may need this patch:
>
> ---
>
> diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> index 475559e..52873d9 100644
> --- a/arch/arm/mach-ep93xx/ts72xx.c
> +++ b/arch/arm/mach-ep93xx/ts72xx.c
> @@ -142,7 +142,7 @@ static int ts72xx_nand_device_ready(struct mtd_info
> *mtd)
>
> static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL };
>
> -#define TS72XX_BOOTROM_PART_SIZE (SZ_16K)
> +#define TS72XX_BOOTROM_PART_SIZE (SZ_128K)
> #define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M)
>
> static struct mtd_partition ts72xx_nand_parts[] = {
>
> ---
>
> Note that this partition size issue is important because the patch is
> currently in 2.6.35-rcX (with SZ_16K).
> It appears that Technologic Systems made a new "nand layout" with
> SZ_128K, but, is this for big flash (128mb) or all of them ?
>
> Thanks!
> Matthieu Crapet
>
> PS: Oops forgot url: http://mcrapet.free.fr/
>
AFAIK, the new layout only applies to the 128M option. I'm pretty sure TS would
not have changed the original product spec for the basic memory option.
That patch is definitely needed for the 128M boards so if mainline is going to
add support for the boards it really needs to have an option to set the correct
mapping.
Thanks for all your effort on the patch set.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|