[ts-7000] Issue with ttyAM0

ts-7000

[ts-7000] Issue with ttyAM0

To:
Subject:	[ts-7000] Issue with ttyAM0
From:	Milind Pande <>
Date:	Tue, 15 Jun 2010 23:16:40 -0700 (PDT)

Dear Group,

I have tried to modify /etc/inittab for 9600 baud rate

T0:23:respawn:/sbin/getty -L ttyAM0 9600 vt100

and rebooted TS7260.

TS7260 rebooted and not getting any login prompt in serial console.

If any one have already worked on this please help me out.

Regards,

Milind.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Issue with ttyAM0, Milind Pande <=

Previous by Date:	[ts-7000] Re: TS-7200, max197, and lm34 weirdness, j.chitte
Next by Date:	[ts-7000] TS7260-VGA screen goes blank, Milind Pande
Previous by Thread:	Re: [ts-7000] Script to "Grow" Fourth Partition of T.S. SD Cards [1 Attachment], Russ Nelson
Next by Thread:	[ts-7000] TS7260-VGA screen goes blank, Milind Pande
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU