Jim,
There are some calibration values in the board that the program uses.
It was not working for me. I tried to redo a lot of the code only to
find out calibration values were incorrect. TS replaced the board for me
and new board worked with the same code without issues.
-Satish.
On 06/01/2010 03:04 PM, Jim Jackson wrote:
>
>
>
> In the example code provided by TS, adc_7250.c , there is
> some manipulation of the output of the adc, which looks suspiciously like
> "magic" to me :-)
>
> Anyone know where, if anywhere this is defined?
>
> I'm simply after a linear integer value that is proportional to applied
> voltage.
>
> cheers
> Jim
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|