To: | TS-7200 Mailing List <> |
---|---|
Subject: | [ts-7000] Kernel panic, please share config file for linux kernel 2.6.29+ for TS-7200 |
From: | Balaji Ravindran <> |
Date: | Sat, 15 May 2010 22:51:06 -0700 (PDT) |
Hi all,
Guess some email address issues, and the groups doesn't receive my mail. thats why am not getting any response, changing my email address could somebody please share their working .config file for Linux kernel 2.6.29 on TS7200. I used the one from /arch/arm/configs/TS7400_defconfig, it works to an extent, but after mounting CF file system, i get a kernel panic sync error Please Help !!!!, Is somebody kind enough to share their latest kernel config file with the kernel source(working one of
course :) ) Am stuck for the last 3 days ! ! ! Raw file loaded 0x00218000-0x003c7f3f, assumed entry at 0x00218000 RedBoot> RedBoot> RedBoot>
RedBoot> exec -c "console=ttyAM0,115200 root=/dev/hda1" Using base address 0x00218000 and length 0x001aff40 Uncompressing Linux......................... Linux version 2.6.29-ts (gcc version 3.4.4 (release) (CodeSourcery A0 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=40007177
CPU: VIVT data cache, VIVT instruction cache Machine: Technologic Systems TS-72xx SBC Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8016 Kernel
command line: console=ttyAM0,115200 root=/dev/hda1 PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 8MB 8MB 8MB 8MB = 32MB total
Memory: 28848KB available (3172K code, 220K data, 128K init) Calibrating delay loop... 99.73 BogoMIPS (lpj=498688) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 760 bytes
NET: Registered protocol family 16 ep93xx: PLL1 running at 400 MHz, PLL2 at 192 MHz ep93xx: FCLK 200 MHz, HCLK 100 MHz, PCLK 50 MHz bio: create slab
<bio-0> at 0 SCSI subsystem initialized NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 2, 20480 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision) JFFS2 version 2.2. (NAND) ï 2001-2006 Red Hat, Inc. JFS: nTxBlock = 225, nTxLock = 1803 msgmni has been set to 56
alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered (default) Serial: AMBA driver
apb:uart1: ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA console [ttyAM0] enabled apb:uart2: ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA apb:uart3: ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
brd: module loaded ep93xx-eth version 0.11 loading eth0 (): not using net_device_ops yet ep93xx_mii_bus: probed
Generic PHY 0:01: PHY supports MII frame preamble suppression net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1) net eth0: ep93xx on-chip ethernet, IRQ 39, 00:d0:69:41:1c:71 Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18 hda: SanDisk SDCFH-004G, CFA DISK drive ide0 at 0xc60b2000-0xc6098007, hda: max request size: 128KiB
hda: 7835184 sectors (4011 MB) w/1KiB Cache, CHS=7773/16/63 hda: hda1 Driver 'sd' needs updating - please use bus_type methods ts72xx-ide: probe of ts72xx-ide.0 failed with error -16
scsi0 : pata_ts72xx ata1: PATA max PIO4 mmio cmd 0x11e001f0 ctl 0x11e003f6 irq 40 physmap platform flash device: 01000000 at 60000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031
Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled cmdlinepart partition parsing not available RedBoot partition parsing not available
rtc-m48t86 rtc-m48t86: rtc core: registered m48t86 as rtc0 rtc-m48t86 rtc-m48t86: battery exhausted ep93xx_wdt: EP93XX watchdog, driver version 0.3 ts72xx_wdt: cannot register miscdev on minor=130 (err=-16)
ts72xx-wdt: probe of ts72xx-wdt failed with error -16 TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17
NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. rtc-m48t86 rtc-m48t86: hctosys: invalid date/time
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem) on device 3:1. Freeing init memory: 128K Kernel panic - not syncing: Attempted to kill init! __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] Re: yahoo group dead search functions, j.chitte |
---|---|
Next by Date: | [ts-7000] Re: yahoo group dead search functions, j.chitte |
Previous by Thread: | [ts-7000] config file for TS7200 and linux kernel 2.6.29 ?, Balaji Ravindran |
Next by Thread: | [ts-7000] Re: TS-ADC16 continuous sampling, mario.huizar |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU