Hi,
what is the minimum I need to alter to test crunch fp?
I have a 2.6.32 kernel built with maverick crunch enabled and a small busybox
based fs that boots and works correctly. glib , binutils etc. was suitably
patched to , allegedly , run maverick fp code but in this initial build I have
not used the compiler switches needed to produce maverick instructions.
I rebuilt the whole lot with a maverick fp toolchain and it all worked ...
except anything using fp . eg 1+1.0 is wrong by several hundred orders of
magnitude ;)
I need to do some debugging without rebuilding the whole fs and kernel each
time I try something.
What is the minimum I need to rebuild and install each time I alter the
toolchain?
thx
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|