ts-7000
[Top] [All Lists]

Re: [ts-7000] Re:platform driver for MAX197

To:
Subject: Re: [ts-7000] Re:platform driver for MAX197
From: Matthieu Crapet <>
Date: Thu, 29 Apr 2010 19:29:22 +0200
Hi all,

I didn't included because I didn't have time to test it. I was planning 
to rewrite it but lack of time.
As some of you seem to be using it I will readd it.

This driver has not been applied for mainline. It's not planned for now.

Just take "0018-ts72xx_max197.patch" from 
"linux-2.6.32-rc3-ts7200_matt-1" patchset
and apply it to the new patchset, it should work (not tried it).

Regards,
Matthieu


Dominic Storey wrote:
>
> I found it was not in the 2.6.32.3 source code and I had to go back to 
> Matt's earlier patch and add it back myself. I also had to add some 
> platform driver code to make it work. Perhaps Matt can write here and 
> explain things a little - perhaps the max197 stuff is in the latest 
> kernel patch from kernel.org - have you looked there?
>
> Otherwise, I can send you the code I have that makes it work ... 
> puzzled together with help from Matt and others. I have the keypad 
> driver operational for the Technologic 4x4 keypad, the max197 (thanks 
> Hartley) and a simple driver for the relay8 board.
>
> I don't have access to my home system until later this week - I was 
> one of those unfortunates stranded in the US by that pesky Icelandic 
> volcano. I am currently on a ship heading for Lisbon (thank heavens 
> for satellite connections! - email is doable but slow!)
>
> Dominic Storey
>  <dstorey%40barossafarm.com>
> Riseley, United Kingdom
>
> 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU