--- In "j.chitte" <> wrote:
>
>
>
> --- In "arquattr" <accounts@> wrote:
> >
> > I have a TS-7200 running Debian and when the fconfig includes 'ip=dhcp' and
> > it's connected to a router, the bootup hangs on sending DHCP requests.
> > When the cable is plugged into the cable modem though, it gets an IP
> > address assigned right away.
> >
> > Is there some router setting or other TS-7200 configuration that needs to
> > be done to make this work?
> >
> > Thanks
> >
>
> where are you expecting it to get the IP from ?
>
> If you don't know it's likely that your hardware doesn't either.
>
I expect it to get the IP from the DHCP server running on the router, just as
every other computer I have connected to that router does.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|