Re: [ts-7000] Re: Booting TS7300 from SDCard

[Mike Ingle <>]

As far as I can recall (not very) the TS7300 SD support for the first SD card is built into the CPLD, not the FPGA.  You need the TS bootloader because the implementation is proprietary.   Someone should look in a manual, but I believe that is correct.

Regards,

Mike

On Apr 21, 2010, at 8:15 PM, Jason Stahls wrote:

 

pkm_munot wrote:
> Now I am trying to write a second stage bootloader which will initialize the sdcard and load redboot from sdcard. This in turn will load rest of the bits from SDcard.
>
> Its this approach right?

I'd imagine, depending on the size of the eeprom you have that you could
get RedBoot to do it all for you right from the eeprom. The EP930x
chips are fairly popular, I'm sure there's other bootloaders out there
as well that would run on it like uBoot, ect that may already have SD
support.

--
Jason Stahls

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___