[ts-7000] Pls help - COM1 on TS7260 blocks tilt sensor board

["Alex" <>]

I have a problem with TS7260 COM port.  I am trying to use COM1 port to read 
tilt sensor data.  Sometimes the tilt sensor works good, and sometimes it 
"hangs" during power on.  I narrowed down the problem to the fact that TS7260 
is sending something on COM1 during boot time, which occasionally blocks tilt 
sensor board.  I already disabled getty() and removed JP2 jumper (so COM1 
should not be acting as console).  Does anybody know what processes are trying 
to send data on the COM1 during boot-up time and how to turn off these 
processes?

I am running "standard" off-the-shelf 7260 with 2.4.26 kernel.  I can not use 
COM2 because it is already used for other purpose.  Both 7260 and tilt sensor 
board are powered up at the same time.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/