[ts-7000] TS7800 - Red led off same as disable the WDT

["Ian" <>]

Hi,

I note from the ts7800ctl.c that the command to turn off the RED led matches 
the command to disable the WDT.

WDT Off:
twi_write(WDT_OFF); (where WDT_OFF == 0)

RED Off:
twi_write(0);

Seems a bit strange that I should need to re-enable the WDT just because I have 
turned OFF the red LED?

Any thoughts?

by the way - tested this with 
ts7800ctl -f; ts7800ctl -F

Thats feed followed by OFF. No reset happened.

TIA

Ian Cole



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/