--- In Jason Stahls <> wrote:
>
> j.chitte wrote:
> > Hi,
> >
> > I have a basically working 2.6 eabi built system running on ts7250 via nfs
> > but can't login via ssh.
> >
> > I built the fs image along the same lines as TSlinux but using upto date
> > versions, so it's busybox based and uses dropbear for ssh verification.
> >
> > I'm using console via minicom and can login OK as root on console. However,
> > attempts to login over ethernet using ssh get refused.
> -snip-
> > password:
> > Permission denied, please try again.
> >
> > I'm wondering if I may not have got the config right while building
> > dropbear.
> >
>
> Looks like dropbear is not allowing root to login via SSH which is
> fairly common. Try logging in as a regular user, it should work. If
> you really want to login as root check the dropbear man pages for info
> on if/how you enable root logins.
>
> --
> Jason Stahls
>
Thanks Jason,
it turned out to be some libs were not getting copied by ct-ng. I found the
answer here.
http://lists.ucc.gu.uwa.edu.au/pipermail/dropbear/2005q4/000287.html
our very own patron ;)
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|