Re: [ts-7000] How can I use Jumbo frame with TS-7800?

[Kamada Keisuke <>]

Hi Kristof,

Thanks for your suggestion.

I insert the line 'mtu xxxx' to the file '/etc/network/interfaces'.

After reboot, it seems to enable Jumbo frame.

I confirmed to enable with your way 'ifconfig eth0 mtu 9500'  also.

Best regards,

KAMADA Keisuke

---

From: Kristof Provost <>
To:
Sent: Tue, March 23, 2010 10:29:23 PM
Subject: Re: [ts-7000] How can I use Jumbo frame with TS-7800?

 

On 2010-03-23 02:51:54 (-0000), kamada.keisuke <kamada.keisuke@ yahoo.com> wrote:
>  
>
> How can I use Jumbo frame with TS-7800?
>
Have you tried 'ifconfig eth0 mtu 9500' ?
Looking at the (latest) kernel source the driver should support that.

I don't have the source for the standard TS kernel here so I can't check
that, but you should find it in drivers/net/ mv643xx_eth. c under the
mv643xx_eth_ change_mtu function if it's supported.

Regards,
Kristof

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___