We had problems with the serial ports on a TS-7800 with FPGA revision 8. We
found out from Technologic Systems that revision 8 has a known problem. The
solution was to send the board back to be reprogrammed.
--- In "jiggersplat" <> wrote:
>
> i'm having some really weird, unexplainable problems with on-board serial
> ports on a ts7800. i'm now trying to run my code using the ts-ser1 to see if
> it makes any difference (same code works on just about every other computer
> with a serial port i can get my hands on, but only part of the time on the
> ts7800).
>
> there is very little documentation and what traffic there is on the listserv
> is all in relation to the ts72xx.
>
> do i need an special kernel modules install?
>
> what com port and irq should i use?
>
> what device node will it appear as?
>
> i only see two port reported at boot time, which are the built in com1 & com2
> headers. should i see a third for the ts-ser1?
>
> thanks,
> dan
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|