I have used the process on
http://www.seiner.com/mediawiki/index.php/Copying_boot_sdcard
in the past...
/mike
--- In "gcworrell" <> wrote:
>
> OK, the original post was years ago, but now I've purchased several more
> TS-7300's, and now I can only get 512M formatted on a 2G CF card, no matter
> what blocksize options, auto options, etc., I try.
>
> I was hoping the issue described below was fixed and delivered with the new
> TS-7300's.
>
> I've tried:
>
> mke2fs -b[1024 2048 4096] /dev/sdcard1/disc0/disc
>
> and after I mount it and df -h I see the whole partition is 469M.
>
> What am I doing wrong?
>
> G.
>
> --- In Eddie Dawydiuk <eddie@> wrote:
> >
> > Hello,
> >
> > > I am trying to format /dev/sdcard1/disc0/disc. The CF is 2GIG, and I
> > > need the entire 2GIG as one partition.
> >
> > The TS-7400 should support up to 4GB SD cards, although the TS-7260 and
> > TS-7300 only support up to 1GB SD cards. In the next couple of weeks the
> > TS-7260 and TS-7300 will also support up to 4GB. I'll send a message to
> > this list when this is available.
> >
> > > I figured out how to do this a few months ago with a 1GIG CF (and I
> > > remember it took a while to figure it out) but after I run mke2fs -b
> > > 1024 /dev/sdcard1/disc0/disc and mount it, I only get a 1GIG partition,
> > > according to df -h. I tried a block size of 2048, and the mke2fs
> > > default blocksize (the one it hueristically computes if you don't
> > > specify a block size) of 4096. They both complete the formatting but
> > > won't mount.
> >
> > There was a problem with the SD card driver that only allowed it to work
> > with filesystems with a 1KB block size. This issue was resolved a couple
> > of months ago.
> >
> > //Eddie
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|