[ts-7000] TS-7400 PWM

To:
Subject:	[ts-7000] TS-7400 PWM
From:	"janopalma" <>
Date:	Fri, 05 Mar 2010 03:09:05 -0000

Hi
In the EP9302 datasheet I found that the pin136 is EGPIO14 and can be used as 
pwm01 to generate a pwm signal. If anyone has worked with this board please 
send me some information on how configure and use this peripheral. I'm working 
with Debian Linux and C.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7400 PWM, janopalma <=

Previous by Date:	[ts-7000] beginner in arm boards, pc.pal6
Next by Date:	Re: [ts-7000] beginner in arm boards, Angel
Previous by Thread:	[ts-7000] beginner in arm boards, pc.pal6
Next by Thread:	Re: [ts-7000] beginner in arm boards, Alexey Vdovin
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU