ts-7000
[Top] [All Lists]

[ts-7000] boot fails on 2.6.33 on ts72xx

To:
Subject: [ts-7000] boot fails on 2.6.33 on ts72xx
From: "Dom Storey" <>
Date: Tue, 02 Mar 2010 08:42:02 -0000
Hi

I have been compiling the 2.6.33 kernel with Matt's patches. I find that if I 
use Matt's ts7250_eabi_full_defconfig the kernel will freeze just after the 
dots and the message that says "done loading kernel" I can't seem to get past 
this or get any diagnostics out with earlyprintk options or by recompiling the 
kernel with debug support. Anybody else seen similar behaviour and if so, did 
you do anything about it?

The only thing that kind of works for me is to use the 
ts72xx_eabi_mid_defconfig configuration. Unfortunately, this stopped in exactly 
the same way for me as well too (I am writing a kernel driver and have modified 
ts72xx.c as well as adding my own driver.) I accept it's probably me somewhere, 
but I am looking for ideas on how to move forward with debugging...

thanks Dom



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] boot fails on 2.6.33 on ts72xx, Dom Storey <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU