I am still stuck,
I would like clarify that I have already turned off Hardware control of
hyperterminal and my interupt wait time was also 1 second. According to old
posts, most people got this problem due to these two reasons.
but for me, it is different.
any solution?
--- In "Fahad C" <> wrote:
>
> I thing, I did wrong try here.
> Force console for special debug messages: false
>
> So how to overcome this. As it was an option so obviously so obviously it was
> logical to test it. Also not explained in Documents.
>
> any idea?
>
>
>
> --- In "Fahad C" <fahadislam2002@> wrote:
> >
> > Hi all,
> > While trying to connect LAN, I gave some wrong setting to RedBoot and
> > now it is not allowing me to interupt (Ctrl-c) and change setting. Every
> > time I start my board, it gives following error
> >
> > $T050f:74010000;0d:9ca60300;#4f
> >
> > I enable error messages for network to 3 and I thing it is giving error
> > numbers. I am unable to understand that and cannot change as it donot allow
> > to interrupt.
> >
> > any solution?
> >
> >
> >
> > .Fahad
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|