ts-7000
[Top] [All Lists]

[ts-7000] 7800 createmtdroot fails to clear the onboard flash

To:
Subject: [ts-7000] 7800 createmtdroot fails to clear the onboard flash
From: Robert Ulbrich <>
Date: Thu, 25 Feb 2010 08:12:51 -0600


I believe you need to be booted from the SD card (fastboot) then issue the createmtdroot command. If you are booting from the onboard flash (fastboot), then the flash partitions are mounted, which would cause problems when you try to erase blocks.

-Rob


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU