@satish,
It display many things (given below) but I cannot find usb device name.
-------------------dmesg-------------------------------------
Linux version 2.4.26-ts9 (gcc version 3.3.4) #1 Tue May 2
09:45
:37 MDT 2006
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 2 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 3 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200 root=/dev/hda1
Relocating machine vectors to 0xffff0000
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 8MB 8MB 8MB 8MB = 32MB total
Memory: 28524KB available (1303K code, 343K data, 72K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled
rtc: no TS-5620 RTC detected.
p93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
about to do sbc_setinfo
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Technologic Systems TS-7XXX IDE initialization - driver version 1.3, 6/21/04.
hda: SanDisk SDCFB-1024, CFA DISK drive
ide0 at 0x8d000000-0x8d000007,0x88400006 on irq 32
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 2001888 sectors (1025 MB) w/1KiB Cache, CHS=1986/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [993/32/63] p1
TS-7200 flash: Found 1 x16 devices at 0x0 in 16-bit bank
TS-7200 flash: Found an alias at 0x800000 for the chip at 0x0
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x20000,blocks=64
Creating 3 MTD partitions on "TS-7200 flash":
0x00000000-0x00020000 : "TS-BOOTROM"
0x00020000-0x00620000 : "Linux"
0x00620000-0x00800000 : "RedBoot"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
/dev/ide/host0/bus0/target0/lun0: p1
/dev/ide/host0/bus0/target0/lun0: p1
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing init memory: 72K
VFS: Disk change detected on device 03:00
/dev/ide/host0/bus0/target0/lun0: p1
enable_irq(39) unbalanced from c02d18f0
-------------------dmesg-------------------------------------
--- In Satish Chetty <> wrote:
>
> When you plug in the USB, what does dmesg show?
>
> -Satish.
>
> Fahad C wrote:
> >
> >
> > Hi all,
> > I have mounted CF and have done some other experiments. Now I am trying
> > to mount USB. I cannot find usb device name? also checked /etc/fstab and
> > manualy tried common device names for usb like sbd or sda1 etc but
> > device not found.
> > can help?
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|