The TS-7500 software guide should take you through most of the steps you will
need to start developing using the TS-7500.
Download the TS SD image from the FTP site:
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/binaries/ts-images/2gbsd-eclipse-dec152009.dd.bz2
Using Linux (I used Ubuntu) extract the contents to a known location.
2gbsd-eclipse-dec152009.dd should be extracted...
Insert the micro-SD card into a USB card reader on your PC. On my PC it was
/dev/sdb
Open terminal and navigate to the location of the .dd file.
Begin tranfer...
sudo dd if=2gbsd-eclipse-dec152009.dd of=/dev/sdb
(Note: you may have to replace /dev/sdb with the path of your SD card on your
PC)
It will take a while (~3-5 minutes to copy).. you should then have a usable
micro-SD card.
-Rob
--- In "Jongsoo Kim" <> wrote:
>
> All
>
>
>
> __,
>
> I have about 10 TS7500 and 10 empty SD card. And I am trying to load
> lenny-arm-dec152009.tar to SD card.
>
>
>
> I am looking for some help to install lenny-arm-dec152009.tar to SD card
> that I bought.
>
> I used another Linux PC. Whenever I extract lenny-arm-dec152009.tar into SD
> card, an error occurs.
>
>
>
>
>
>
>
> Thanks
>
>
>
> Jongsoo
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|