sanjuan34 wrote:
> Hi.I'm having trouble getting i2c setup on a TS-7350
>
> Currently i2c_dev and i2c_core are loading at bootup, but udev isn't creating
> /dev/i2c-0. If I create it manually (mknod /dev/i2c-0 c 89 0), it still
> doesn't work.
> Now, I'm not sure if I'm doing this correctly:
> to /etc/modules (at the top) I've added
>
> i2c_core
> i2c_dev
> lincan hw=tscan io=0x150 irq=33 baudrate=1000
>
> udev is creating /dev/can0 for the lincan driver, so I assume this is the
> right way to add modules you want loaded at boot time?
>
You need a driver as well, there is a bit-bang driver in the files section.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|