ts-7000
[Top] [All Lists]

[ts-7000] Re: TS-7800 wake from sleep using dio_04 (interrupt)

To:
Subject: [ts-7000] Re: TS-7800 wake from sleep using dio_04 (interrupt)
From: "" <>
Date: Fri, 05 Feb 2010 22:08:33 -0000
Hello?
Is there a different group for the TS-7800; there seems to be alot of 7200 & 
7400 questions?

I've attempted to contact TS for the past few days about this issue to no 
avail.  Just wondering if anyone has had similar experience and possibly a work 
around for interrupt driven wake-up for TS-7800

I'm now looking into the ATMEGA48V AVR_RESET# (PC6) signal; or possibly some io 
driven relay controlling the pwr directly... 

Unfortunate when the documentation says it supports such a feature :[

thanks
-mike

--- In  "" <> wrote:
>
> Hello Group;
> 
> I've recently tried the schematic documented wake by dio_04 when the ts7800 
> has been put to sleep using the provided ts7800ctl -s command.  This causes 
> the ATMEGA48V micro to cut power to the ARM, and sleep in a very low power 
> mode ~200uA.  It works great... well the sleep does.  The details described 
> from this post here:
> http://tech.groups.yahoo.com/group/ts-7000/message/11870
> 
> The problem is waking the board; the schematic says either the dio_04 or 
> ISAB32(GND) can edge interrupt the ATMEGA48V awake, but the only thing I see 
> happening when grounding out the dio_04 pin is the board comes halve awake.  
> The current draw ramps back up, the board GRN LED blinks, but the board does 
> not reboot; it just prints a single garbage character out to serial COM1 and 
> hangs.
> 
> I have a couple clues from the ATMEGA48V datasheet, but without the source 
> code who knows how that interrupt is being handled...
> 
> My question to the group is: has anyone had this interrupt by dio04 or ISAB32 
> successfully wake the ts7800?  if so how? 
> 
> 
> -mike
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU