On 2/3/10, naturalwatt <> wrote:
>
>
> --- In "tsao.terence" <> wrote:
>>
>> Hi,
>>
>> I just brought a TS7260 and I plugged in a USB thumb drive. I want to
>> read and write data files to the thumb drive.
>>
>> From my novice understanding is that I need to first mount the USB, so I
>> performed the command "mount -t usbdevfs none /proc/bus/usb".
>>
>> Then I should be able to access that USB just like how I access a folder
>> right?? Where and How would I do that?
>>
>> Thanks!
>>
>
> You will need to load modules first.
>
> Try the following, watching for errors messages and looking at the console
> buffer using dmesg.
>
> insmod usbcore
> insmod pcipool
> insmod usb-ohci
> insmod osb-ohci-ep93xx
> insmod scsi_mod
> insmod sd_mod
> insmod usb-storage
>
> Then mount /dev/scsi/host0/bus0/target0/lun0/part1 /mnt
> should succeed.
>
> Martin
>
>
A new TS7260 from the factory running TS-Linux has a script
/usr/bin/loadUSBModules.sh
--
Joel R. Morgan
Morgan Millwright Services, Inc.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|