[ts-7000] Re: USB Serial Adapter 7400

["tsao.terence" <>]

--- In  "bvandergaast" <> wrote:
>
> Hi,
> 
> Wondering how to use a usb serial adapter on the 7400. I used the following
> 
> insmod usbserial
> insmod pl2303
> (plugged in device)
> 
> But there is no /dev/ttyUSB0 file. dmesg says device attached to ttyUSB0 but 
> i am not sure how to use it. Am i forgetting something?
> 
> 
> Thanks
>
I am wondering the samething too.  I am using that to interface with a short 
range radio card to gain better bandwidth, since USB is faster than uart.

Thank you



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/