[ts-7000] GPS on wifibox 7400 USBSERIAL

["bvandergaast" <>]

Hi, 
I am trying to use a GPS receiver on the Wifibox and can't figure out how to 
monitor the output of the GPS which is essentially a Serial to USB adapter.
 
I tried 
modprobe usbserial Vendor=0x067b Product=0xaaa0 
(where vendor and product retrieved from dmesg)

but got
Using /lib/modules/2.6.29-ts/kernel/drivers/usb/serial/usbserial.ko
insmod: cannot insert 
`/lib/modules/2.6.29-ts/kernel/driver/usb/serial/usbserial.ko': Unknown symbol 
in module (-1): No such file or directory
modprobe: failed to load module usbserial

dmesg Says Following
usbserial: Unknown parameter `Vendor'


Thanks




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/