[ts-7000] Initialize COM2 serial port for GPS

["cheezy072000" <>]

I have the TS-7200 SBC and am trying to hook up a GPS module using NMEA 0183 
protocol.

Right now I am running the Linux 2.4 kernel and the following is what came out 
when I typed uname:

Linux ts7000 2.4.26-ts11 #215 Thu Jun 8 14:30:17 MST 2006 armv4l GNU/Linux

I want to know how to access COM2 so that I can see the output messages from 
the GPS on the terminal.  I have used a MAX232 chip for logic level conversion 
to RS232 from TTL and have tested this with a windows system and it works fine.

I am new to LINUX and these SBC PC-104's so if anyone can help me I would 
really appreciate it.  This is a time pressing issue, since I am working on my 
Senior Engineering design project at UCSC and have only 8 weeks left.  Thank you



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/