On Mon, Jan 4, 2010 at 2:59 AM, naturalwatt <> wrote:
> We need a bit more information about the board and kernel level.
>
> Normally TS make modules available on their FTP site under something like
> /ts-arm-sbc/ts7500-linux/binaries/ts-modules/ but in this case the cp2101.ko
> module is not present.
The board is a 7260, but I'm running the lenny distro for the 7400.
>
> You will need to download the correct kernel sources and follow the kernel
> building process all the way through to 'make modules' which should amongst
> other things produce kernel/drivers/usb/serial/cp2102.ko. You don't need to
> replace the kernel on your board, just build a module that is the correct
> version
> for the kernel you have.. It's pretty obvious if it works or not, just
> remember to
>check with dmesg if the module fails to load.
> The TS documentation for doing this is pretty good. 'LinuxArmGuide Rev2.3'
> should do it.
This is great, thanks.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|