wrote:
> I haven't used my TS-260 for about 3 years now; now that i finally have a
> project for it i have been having login information trouble when trying to
> login through Windows Hyperterminal. I have no need for the program that is
> currently on the SBC. Is there a way to wipe the SBC or go back to the system
> defaults?
Is it booting from SD or NAND? If you booting from the onboard flash
and you can login as root then you can download a image from TS's ftp
site <ftp://ftp.embeddedarm.com> If you are booting from SD then just
dump the file system tar.gz you can also find on the ftp site into the
ext2 partition on the card. If you're booting from onboard flash and
can't login, then you'll need to get into redboot when the board first
starts. I can't remember the escape sequence to get into it, I think
it's <ctrl><c>. From there you need to add init=/bin/sh to the kernel
command line and boot the board. It will then come up directly to a sh
prompt where you can use passwd to reset the root password.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|