[ts-7000] Re: Can I use "CAN PROTOCOL" 7400 or 7500

["PeterElliot" <>]

Hi,

The TS-7500 web page states 'OPTIONAL CAN bus'. I can't see any mention of CAN 
on the TS-7400 page.

I would assume that CAN would be available via the 7500's FPGA via a software 
load, but you would need to add a can transceiver to the expansion connector 
pins to use it.

Regards,

PJE



--- In  "Reinaldo A. Fagundes" <> wrote:
>
> I need know if can I use CAN protocol with  ts7400 or ts7500, I know use the
> RS232 but can´t know use CAN in Linux, in microcontroller not have a
> problem.
>
> 
>
> Have any documentation about this with embbededarm products?
>
> 
>
> regards
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/