Are you using the 2.4 or 2.6 series kernel? What is the board type - ARM or
Intel?
If it's the 2.4 kernel on TS7250 or similar, get the ftdi_sio.o module from the
FTP site.
Check with dmesg to see if you are getting more information.
I tried this on the TS7500 board using the 2.6 kernel and there was a problem
that the kernel had been compiled with one setting and the modules with
another. I can't recall the exact setting, but it was pretty obvious from the
dmesg entry.
--- In "nightz13" <> wrote:
>
> Hello,
>
> I'm trying to use an FTDI USB to Serial device.
> I've added the driver:
> "make menuconfig"
> Device Drivers --->
> USB Support -->
> USB Serial Converter support --->
> USB FTDI Single Port ...(EXPERIMENTAL)
>
> I made it modular.
> Compiled the kernel.
> Booted.
>
> Now, how do I insert the module?
> "insmod ftdi_sio.o" returns invalid module format.
>
> Any help would be appreciated.
>
> Thanks,
> -Rocko
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|