From: On Behalf Of
Reinaldo A. Fagundes
Sent: Friday, November 06, 2009 12:50 PM
To:
Subject: [ts-7000] TS-7500 remove exit command for start linux
/*In the TS-7500 card I need send command "exit" for start linux, I like
/*remove it, and start linux automatic in boot.
/*what I need change to this????
/*I'm new user of linux...
/*regards
I think u want to boot from sd card. If like that u can find a lot of thing in
“TS-7500_Manual” and “TS-7500_Software_Guide” from arm
page.
Should you wish to automatically bypass the fastboot and proceed directly into
starting the SD card version of Linux, you can do so with the following command
issued to the fastboot shell:
$ rm linuxrc; ln -sf /linuxrc-sdroot /linuxrc; save
If you would like to run the TS-7500 without the presence of the TS-752, you'll
need to copy these changes to the SPI Flash at start up. (instead of exit
command)
Good luck…
Serkan
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|