ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: Have i borked my flash?

To:
Subject: Re: [ts-7000] Re: Have i borked my flash?
From: Flávio Ribeiro <>
Date: Fri, 2 Oct 2009 12:57:08 -0700 (PDT)


To simplify my job i used http upload; load -v -r -b 0x00218000 -m http -h 192.168.1.21 /vmlinuz

then, fis delete vmlinux, fis create and it worked like a charm.


From: Jim Jackson <>
To:
Sent: Friday, October 2, 2009 11:48:00 AM
Subject: Re: [ts-7000] Re: Have i borked my flash?

 



On Thu, 1 Oct 2009, Razvan-Ionut Stoian wrote:

> Don't bother! The redboot version is probably too old.

Errr don't think so. My board is one of the original TS7200s, bought just
after they'd come on the market. I've not upgraded redboot, and it
it reads and loads a kernel from the CF just fine. It's the only way I
boot my ts7200.

> Make an image of the original TS7000 CF card you already have (dd if= of=
> .. yadda-yadda) and clone it onto your new  CF. I had to erase the
> original rootfs (on the new CF). All you need to do after that is to
> transplant a new rootfs (via debootstrap, for example)
>
>  ...just my two cents !
>
> --- On Thu, 10/1/09, Jim Jackson < uk> wrote:
>
> From: Jim Jackson < uk>
> Subject: Re: [ts-7000] Re: Have i borked my flash?
> To: .com
> Date: Thursday, October 1, 2009, 5:27 PM
>
>
>
>
>
>
>  
>
>
>
>
>
>
>
>
>
> On Wed, 30 Sep 2009, l.com wrote:
>
>
>
>> Hi,
>
>>
>
>> Im facing the same problem:
>
>>
>
>> RedBoot> dis
>
>> hda1 Linux
>
>> RedBoot> load -r -b 0x00218000 -m disk hda1:/boot/vmlinux
>
>> e2fs_open: e2fs_inode_lookup failed
>
>> Can't load 'hda1:/boot/ vmlinux': Can't open file
>
>
>
> Just a thought, maybe the redboot code can only read from the root
>
> directory, try putting the the kernel file at hda1:/vmlinux
>
> I always boot from CF on my ts7200, but my kernel is always in the root
>
> directory.
>
>
>
>> I have a vmlinux on that path, with x permissions to all. My card
>
>> filesystem is ext2.
>
>>
>
>>
>
>> --- In .com, Morgan Gangwere <0.fractalus@ ...> wrote:
>
>>>
>
>>> OK figured it out.
>
>>> Turns out, the cheap 500 line webserver i had in C# wasnt cutting it.
>
>>> I grabbed a cheap TFTP server and it worked like a charm.
>
>>>
>
>>> ... now to figure out how to make it boot the ts11 zImage... i just get trash...
>
>>>
>
>>>
>
>>> --
>
>>> Morgan gangwere
>
>>>
>
>>> "Space does not reflect society, it expresses it." -- Castells, M.,
>
>>> Space of Flows, Space of Places: Materials for a Theory of Urbanism in
>
>>> the Information Age, in The Cybercities Reader, S. Graham, Editor.
>
>>> 2004, Routledge: London. p. 82-93.
>
>>>
>
>>
>
>>
>
>>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU