To: | |
---|---|
Subject: | [ts-7000] TS-7400 - ttyAM0 |
From: | "lhamaduck" <> |
Date: | Mon, 07 Sep 2009 22:43:34 -0000 |
Hi.. My question is about the serial ttyAM0 - in the manual is showed this serial in 2 conectors (Upper header and Lower header). Upper header Pin 7 - UART TXD - /dev/ttyAM0 Pin 8 - UART RXD - /dev/ttyAM0 Lower header Pin 22 - DIO_18 - GPIO 18 or TXD /dev/ttyAM0 Pin 23 - DIO_19 - GPIO 19 or RXD /dev/ttyAM0 How can I chose between GPIO and Serial in the Lower header? There is configuration parameter? Because this pins is not short-circuit directly thanks ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] how to connect a TS-7800 with a Logitech Quickcam?, kvnherrera |
---|---|
Next by Date: | Re: [ts-7000] TS-7400 - ttyAM0, Petr Ledvina |
Previous by Thread: | [ts-7000] how to connect a TS-7800 with a Logitech Quickcam?, kvnherrera |
Next by Thread: | Re: [ts-7000] TS-7400 - ttyAM0, Petr Ledvina |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU