--- In "janne.kario" <> wrote:
>
> --- In "awolven" <awolven@> wrote:
>
> > Compiling crosstool was a challenge. I did not have any luck with
>
> Instead of compiling crosstools from scratch you might also want to check out
> http://www.emdebian.org/tools/crosstools.html which provides debian packages
> for a number of crosstools. I've managed to succesfully compile a kernel with
> these crosstools.
>
> j
>
Thanks for the tip! I installed them on an i386 ubuntu. The install process
was not as simple as the instructions on the crosstools wiki, but I found that
others that have had similar issues and discovered a workaround. I intend to
test them next...after reading the docs. It seems that emdebian might have
more useful stuff than just the crosstools.
An update to my last post:
I compiled the uvcvideo module and installed it. Got motion installed, plugged
in the logitech quickcam deluxe for notebooks, configured motion, and now can
[more or less] stream video through my 7260. It works, but will segfault if
the scene changes too fast :\
-AKW
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|