Some important info I left out: I'm connected through serial using
minicom, and when I try to ssh to myself:
ts7000:~# ssh localhost
password:
PTY allocation request failed on channel 0
stdin: is not a tty
Which then freezes minicom.
On Mon, 2009-08-24 at 13:59 +0000, matt.minuti wrote:
>
> Hi there!
>
> After following some ts7300 instructions I found on this mailing list,
> I managed to write this image to and SD card and expand the root
> partition to about 1.5gb.
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/binaries/ts-images/512mbsd-7400-linux26-lenny-eabi.dd.bz2
>
> The system almost worked, I had to fix the rc scripts loading hwclock
> modules because for some strange reason the defaults weren't working.
>
> All that's set now, and the system seems to run reliably. I set a root
> password, and can log in and out fine. However, attempting a login via
> SSH triggers an immediate password expiration and boots me out of the
> SSH connection. Via serial, on next login, I need to reset my
> password.
>
> How can I make my password persistent? It doesn't seem to hold no
> matter what I do, and SSH is very necessary for my application.
>
> Thanks,
> ~Matt
>
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|