dokapra :
Ok, I found out the current dir will be used for the rootfs, that's good. I
also found out you can simply put the full path to
"arm-ep9312-linux-gnueabi-gcc" and it pass. It then start to download libtool
and try to build it, and of course fail.
I check the config.log file and I see:
arm-ep9312-linux-gnueabi-gcc: couldn't run
'/home/dunge/x-tools/arm-ep9312-linux-gnueabi/bin/arm-ep9312-linux-gnueabi-gcc--specs=/home/nib/sb2/share/scratchbox2/modeconf/gcc-specs.simple':
No suck file or directory
(of course it's missing a space before --specs, but why?)
Then a few lines after:
qemu: unhandled CPU exception 0x9 - aborting
followed by a register dump.
Did I do something wrong when I installed qemu? Is it not working for EABI?
--- In "Dunge2" <> wrote:
>
> dokapra :
> I downloaded sb2, installed it. I'm trying to follow what is written in the
> readme, copied sys-root to $HOME/buildroot. When I call "sb2-init mytarget
> arm-ep9312-linux-gnueabi-gcc" it say "arm-ep9312-linux-gnueabi-gcc doesn't
> exist". Of course, it can't know the name.. where did I forget a step?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|