Re: [ts-7000] dhcp pump operation failed

[mike ingle <>]

iface eth0 inet dhcp

On Sat, Aug 22, 2009 at 9:18 AM, vogtmrk <> wrote:

 

I am having trouble with dhcp on a ts-7400 board. I know the hardware is working because I can telnet with the board using ts-linux. When I switch to Debian on an sd card provided by ts, I can get the network to work. I am trying dhcp with a working dlink wireless router. pump -i eth0 is returning operation failed.

Any ideas would be greatly appreciated.

/etc/network/interfaces

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static

thanks,
Mark

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___