[ts-7000] redbood baud rate

To:
Subject:	[ts-7000] redbood baud rate
From:	"paul87912" <>
Date:	Thu, 20 Aug 2009 23:14:45 -0000

Is there anyway to set the baud rate for redboot
on a TS7260 running  
version current-TS_5 - built 11:25:50, May  2 2007

some versions of redboot seem to have a setting in the fconfig settings
but not this version





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] redbood baud rate, paul87912 <=

Previous by Date:	[ts-7000] Re: Is it safe?, bburtan65
Next by Date:	RE: [ts-7000] Python vs keyboard issue, pierrot lafouine
Previous by Thread:	[ts-7000] TS7800 Lenny Install to MTD Fails to load devices, eric.robishaw
Next by Thread:	[ts-7000] Warning: TS7800 Watchdog reboots when enabled and time changed, eric.robishaw
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU