[ts-7000] EABI cross compiler and X11

To:
Subject:	[ts-7000] EABI cross compiler and X11
From:	Scott Zimmerman <>
Date:	Fri, 14 Aug 2009 14:24:41 -0700

Hi there,

My project only requires reading from the serial port and drawing simple 2D graphics to the screen. I'm using X11 for this. I have the cross compiler built and running on my Ubuntu laptop (thanks for the great posts on this!). Now I'm trying to figure out if I can X11 header/libs I can build against. I tried copying up the stuff I have install on the TS7K but no dice. Do I need to rebuild X11 with the EABI compiler? Is that likely to be a huge undertaking?

Thanks,

...Zz

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] EABI cross compiler and X11, Scott Zimmerman <=

Previous by Date:	[ts-7000] Re: yaffs tragedy: no more eraased blocks, j.chitte
Next by Date:	[ts-7000] Install X11 on 7300, Mike Lehmann
Previous by Thread:	[ts-7000] java on 7000 - developer help, filipe_al
Next by Thread:	[ts-7000] Install X11 on 7300, Mike Lehmann
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU