[ts-7000] Problem in Expansion bus handling

To:
Subject:	[ts-7000] Problem in Expansion bus handling
From:	"anadigpune" <>
Date:	Tue, 11 Aug 2009 09:37:45 -0000

Hello Everybody,
I am using TS-TPC-7390 for our application. The problem I am facing is, 
whenever I try too connect the expansion bus (BUS_D0-D7, WR#, RD#, ALE# etc.) 
to the circuit the NAND FLASH gets corrupted. I am buffering the databus 
through 245 IC but of no use. can anybody give any solution?




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Problem in Expansion bus handling, anadigpune <=

Previous by Date:	Re: [ts-7000] Re: TS-7390 tssdcard and tsuart driver incompatibility with DMA, Breton M. Saunders
Next by Date:	Re: [ts-7000] TS-7390 tssdcard and tsuart driver incompatibility with DMA, Petr Ledvina
Previous by Thread:	[ts-7000] Re: Couple of Questions, danielm125
Next by Thread:	[ts-7000] writting interrupt request routine, moonlightshard
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU