ts-7000
[Top] [All Lists]

[ts-7000] TS7800 WPA Using IOgear GWU523 association problem

To:
Subject: [ts-7000] TS7800 WPA Using IOgear GWU523 association problem
From: "mohammad.jouni" <>
Date: Fri, 07 Aug 2009 11:37:29 -0000
I am attempting to associate to an Access point with WPA AES encryption
using a TS7800 and IOgear's GWU523 .

I used the following steps to attempt the association :

1- modified /etc/network/interfaces to include the following :

iface eth1 inet dhcp
    address 192.168.1.47
    netmask 255.255.0.0
    gateway 192.168.1.1
    wpa-ssid SSID
    wpa-key-mgmgt WPA-PSK
    wpa-psk passphrease
    wpa-proto WPA
    wpa-driver wext

2- encoded the pass phrase using wpa_passphrase and added the data to
/etc/wpa_supplicant.conf

          ssid="SSID"
          proto=WPA
          pairwise=CCMP TKIP
          group=CCMP TKIP WEP104 WEP40
          key_mgmt=WPA-PSK
          #psk="somepassword"     
psk=987987as9d87a97sd9a7sd97a9sd79a8s7d89a7sd98a7ds897a98d7a89d798as

3- Issued the following command : wpa_supplicant -ieth1 -c
/etc/wpa_supplicant.conf -Dwext

this was the result :

Trying to associate with XX:XX::XX:XX:XX (SSID='SSID' freq=2442 MHz)
ioctl[SIOCSIWFREQ]: Invalid argument
Association request to the driver failed
Authentication with XX:XX::XX:XX:XX timed out.
CTRL-EVENT-SCAN-RESULTS

4- enabling debugging shows the following :

State: DISCONNECTED -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_psk
ioctl[SIOCSIWFREQ]: Invalid argument
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])

Any idea why the association is not being completed ?

Thanks you .






------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] TS7800 WPA Using IOgear GWU523 association problem, mohammad.jouni <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU