--- In naresh raga <> wrote:
>
> Hi ,
> I am working on TS-7300.I have downloaded
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/cross-toolchains/crosstool-linux26-3.4.4-2005q3-2.tar.gz
> I have tried to cross-compile a simple hello.c program using
> arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc
> on my x86 machine using ubuntu9.04--my host machine.
> It has generated a.out executable.I have tried to execute this program on my
> TS-7300 kit having 2.4.26-ts11
> kernel.It says
> "cannot execute binary file".
Because you have generated an EABI executable file. You need a 2.6 kernel and
full EABI runtime system to use an EABI executable.
> I
> have some questions regarding this:Is the above mentioned crosstool is
> the right crosstool-chain for TS-7300?or am I missing some steps in
> generating the correct executable.
Look at the name of the toolchain you downloaded: it is for a 2.6 kernel, and
you are using a 2.4 kernel. EABI will never work on a 2.4 kernel.
regards, ..... Charlie
>
> This is my problem Connor,Can you suggest the exact cross compiler which can
> deal my problem.
>
> Thanks ,Naresh.
>
>
>
>
> Yahoo! recommends that you upgrade to the new and safer Internet
> Explorer 8. http://downloads.yahoo.com/in/internetexplorer/
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|