ts-7000
[Top] [All Lists]

[ts-7000] Re: Name resolution not working on 7400

To:
Subject: [ts-7000] Re: Name resolution not working on 7400
From: "sh_hallmark" <>
Date: Wed, 05 Aug 2009 13:57:16 -0000
I don't have the file /etc/nsswitch.conf on my system.


--- In  Jeremy Freeman <> wrote:
>
> Does your /etc/nsswitch.conf have the following line in it:
> 
> hosts:    files dns
> 
> ?
> 
> --
> Jeremy
> 
> 
> 
> 
> ________________________________
> From: sh_hallmark <>
> To: 
> Sent: Tuesday, August 4, 2009 10:50:34 AM
> Subject: [ts-7000] Name resolution not working on 7400
> 
>   
> I'm not able to get name resolution to work on my 7400 board. I've searched 
> the internet and the archives of this group, but can't find what's missing.
> 
> My board is using DHCP. Here's the configuration:
> $ ifconfig
> eth0 Link encap:Ethernet HWaddr 00:D0:69:40: 7B:48
> inet addr:10.104. 102.81 Bcast:10.255. 255.255 Mask:255.255. 0.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:3201599 errors:0 dropped:0 overruns:0 frame:0
> TX packets:162403 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:39
> 
> lo Link encap:Local Loopback
> inet addr:127.0.0. 1 Mask:255.0.0. 0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:1363 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1363 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:272891 (266.4 KiB) TX bytes:272891 (266.4 KiB)
> 
> $ route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 10.104.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
> 0.0.0.0 10.104.2.1 0.0.0.0 UG 0 0 0 eth0
> 
> $ cat /etc/hosts
> 127.0.0.1 localhost juliet.mycorp. com juliet
> $ hostname
> juliet
> $ cat /etc/resolv. conf
> search mycorp.com.
> nameserver 10.104.20.2
> nameserver 10.86.20.10
> 
> $ ls -l /lib/libresolv*
> lrwxrwxrwx 1 0 0 18 Feb 16 2007 /lib/libresolv. so.2 ->
> libresolv-2. 3.2.so
> -rwxrwxrwx 1 0 0 60628 Aug 4 09:07 /lib/libresolv- 2.3.2.so
> 
> So given all that, I get the following results to a "ping":
> $ ping juliet
> ping: juliet: Host name lookup failure
> $ ping juliet.mycorp. com
> ping: juliet.mycorp. com: Unknown host
> 
> Interestingly, if I remove libresolv-2. 3.2.so, I get the following results:
> $ ping juliet
> localhost is alive!
> $ ping juliet.mycorp. com
> localhost is alive!
> 
> But I still get "Unknown host" when I try to ping a known entity outside this
> box.
> 
> Any ideas??
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU