I downloaded the image and am a little concerned with the fact that
the partition table appears to be VERY strange - there's a W95 FAT32
partition at the beginning that appears to be empty, which shifts the
partitions up by one and wastes over 4MB of SD card space. On top of
that, none of the partitions end on a cylinder boundary, which means
repartitioning it is a concern. Can I just partition out my SD card
and copy the individual partition contents I want (kernel, initrd,
JFFS2 root) over?
Also, I suspect that the SD Card can be booted via a double-chain,
where the onboard flash tslinux kernel can boot the SD card tslinux
kernel, which then can boot the full Debian system, but I haven't had
time to try it yet. I prefer the ability to boot w/o SD card, just
in case :)
Any and all suggestions/pointers/assistance greatly appreciated.
Josh
--- In "rbergerpa" <> wrote:
>
> It's available from Technologic's download site:
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/binaries/ts-images/512mbsd-7400-linux26-lenny-eabi.dd.bz2
>
> --- In "Andy Mercier" <andynmercier@> wrote:
> >
> > Hi,
> >
> > Where is this 512mbsd-7400-linux26-lenny-eabi.dd file? Is it available for
> > download?
> >
> > Thank you.
> >
> > -----
> > Andy
> >
> > --- In "rbergerpa" <web@> wrote:
> > > :
> > >
> > > I'm trying to get my TS-7400 to run the distribution from
> > >
> > > 512mbsd-7400-linux26-lenny-eabi.dd
> > > "
> > > :
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|