[ts-7000] Using portb

To:
Subject:	[ts-7000] Using portb_7 on TS-7400
From:	"gopiballava" <>
Date:	Sun, 02 Aug 2009 22:38:25 -0000

I'm sorry if this is a silly question, but I'm trying to use PORTB_7 on my 
TS-7400. It's a 5v tolerant GPIO pin on the 26 pin connector.

Looking at the docs, I can't figure out which registers control the port B 
pins. Any suggestions?

Thanks,

gopi.





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Using portb_7 on TS-7400, gopiballava <=

Previous by Date:	[ts-7000] How install spca5xx driver for ts7200, ejeffredo
Next by Date:	Re: [ts-7000] Re: Kernel 2.6 and RTAI, Gonzalo A. de la Vega
Previous by Thread:	[ts-7000] How install spca5xx driver for ts7200, ejeffredo
Next by Thread:	[ts-7000] read only file system on ts7800, pattykirsch
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

[ts-7000] Using portb_7 on TS-7400